It’s always frustrating when something goes wrong around the house. Instead of spending hours trying to fix it, sometimes it’s easier to call a professional. But before you do that, make sure that it’s not an issue that you can easily repair yourself! In this blog post, we will discuss some of the most common issues around the house and how you can easily fix them.
1. Clogged sinks
The first common issue is a clogged sink. If your sink is clogged, the first thing you should do is check the P-trap. The P-trap is located under the sink and it’s easy to access. Simply unscrew the cap and see if there is anything blocking it. If there is, simply remove it and screw the cap back on. If the P-trap is clear, the next thing you should do is check the drain for any blockages. You can do this by pouring hot water down the drain and seeing if it drains properly. If it doesn’t, then there is probably a blockage somewhere in the pipe. The best way to remove a blockage is to use a plunger. Simply place the plunger over the drain and push and pull it up and down. After a few minutes, the blockage should be removed and the water should start draining properly.
If you’re still having issues with your sink, then it’s probably time to call a professional.
2. Flickering bulbs
Another common issue around the house is flickering bulbs. This is usually caused by a loose connection in the socket. The first thing you should do is check to see if the bulb is screwed in properly. If it’s not, then simply screw it in until it’s tight. If the bulb is screwed in properly, then the next thing you should check is the socket. Make sure that the connection is tight and there are no loose wires. If everything looks good, then the next thing you should do is replace the bulb. If you’re still having issues with your flickering bulbs, then it’s probably time to call a professional. This will save you from having to replace the bulb every few days. Also, make sure to check your warranty before calling a professional.
3. Leaky faucets
Another common issue around the house is a leaky faucet. This is usually caused by a worn-out washer. The first thing you should do is turn off the water on the faucet. The best way to do this is to turn off the main water supply to your home. Once the water is turned off, unscrew the handle of the faucet and remove the washer. Take the washer to your local hardware store and find a replacement that is the same size. Once you have the new washer, simply put it back in place and screw the handle back on. Turn on the water supply and test out your faucet.
If you’re still having issues with your leaky faucet, then it’s probably time to call a professional to help you find the ideal solution for your issue.
4. Dripping showerheads
Another common issue around the house is a dripping showerhead. This is usually caused by a buildup of mineral deposits. The first thing you should do is unscrew the showerhead and remove it from the pipe. Next, soak the showerhead in vinegar for about an hour. This will help to break down the mineral deposits. After an hour, rinse off the showerhead and screw it back on. Turn on the water and test out your showerhead.
5. Squeaky doors
The last common issue we will discuss is squeaky doors. This is usually caused by loose screws. The first thing you should do is check all of the screws on the door to see if any of them are loose. If you find a loose screw, simply tighten it with a screwdriver. If there are no loose screws, then the next thing you should do is check the hinges. Make sure that the screws are tight and there is no play in the hinge. If everything looks good, then you can try lubricating the hinge with WD-40 or a similar product.
6. Running toilets
Another common issue around the house is a running toilet. This is usually caused by a faulty flapper. The first thing you should do is turn off the water to your toilet. The best way to do this is to turn off the main water supply to your home. Once the water is turned off, flush your toilet and hold down the handle to remove all the water from the bowl. Next, unscrew the lid of your toilet tank and remove the flapper. Take the flapper to your local hardware store and find a replacement that is the same size. Once you have the new flapper, simply put it back in place and screw the lid back on. Turn on the water supply and test out your toilet.
These are just a few of the most common issues that homeowners face on a daily basis. If you’re having any of these issues, don’t panic! We’ve provided you with some easy solutions that will hopefully solve your problem. If not, then it’s probably time to call in a professional. Thanks for reading and we hope this was helpful!